Okidoke. It’s taking me a while to get my act together, but I’m getting there. I have three kits available. They are kit serial numbers 1, 2, and 3.
The kit includes:
1. circuit board
2. eight 10k faders
3. two 10k potentiometers
4. thirty two LED Tact buttons (16 red, 16 green)
5. sixty four 100 ohm resistors
6. 9 various values of resistors other than 100 ohms
7. 16 x 2 LCD screen from Modern Device
8. LCD driver board kit (assembly is required) from Modern Device (where you will get the assembly instructions, BTW)
Things *not* included:
* Arduino Mega
* enclosure + hardware
Price is $249 plus shipping, payment via paypal, shipment via USPS if international, UPS if within the USA.
I even made two videos showing how to assemble the kits, so watch these before you do anything else. Make sure these totally makes sense to you, and you have no reservations about your ability to put this kit together. It’s not a particularly hard kit to put together, but there is a lot of repetitive soldering involved, so you’re the right candidate if you’re already comfortable with soldering, and you already have all of the tools you see in the videos. You’re also already familiar with the arduino platform and ALSO completely realize that this kit runs on the ARDUINO MEGA, and NOT any other variant. If you don’t have an ARDUINO MEGA, you NEED to BUY one. I’m using every single pin on the mega. I couldn’t squeeze this much functionality out of a regular arduino… it’s just too awesome for the little guy.
You have to file down the headers because of where I chose to place the arduino mega. This is sort of cumbersome but it’s also how I was able to keep beatseqr from being any larger than it already is. The Roland TR-808 is cool and all, but c’mon already.. that thing is huge. Plus every square inch of circuit board costs big bucks, so squeezing the arduino into a shield configuration works well enough. I’d maybe try another tactic in the future, but this kits works today. I sold Beatseqr serial number 8 based on this kit.
Ok, so: 1. you read all of the above? 2. you saw both videos and aren’t tripping out? 3. you saw that you need an arduino mega? 4. still interested? email me steve at beatseqr dot com.
I am pleased to announce that MIDI sync out is working in Steppa as of version 0.5! Now you can sync your Beatseqr to any MIDI hardware or software that can receive MIDI clock, which opens a whole new world of possibilities. One scenario to imagine is being able to playback melody or bassline patterns that you previously created along side on-the-fly created drum patterns from Beatseqr. This can really be helpful if you use Beatseqr for live performing like we do for Haptic Synapses. We tested MIDI sync with software like Propellerhead Reason and Ableton Live as well as hardware like the Korg ESX-1…fun stuff!
Also added to Steppa 0.5 is the ability to sync to an audio click track. I know the technique sounds very old-school, but it works….well enough for Haptic Synapses and Antacid Crew to use it to sync all kinds of hardware (old and new) at their last jam session together at Mighty in San Francisco. So how do you like them apples?
Keep an eye on http://beatseqr.com for links to the new version and developing info about Steppa.
hey there. So Apple rolled out a new version of Java 6, and it appears to have solved the problems of it not letting compiled processing apps to launch. So! this is really good news because there are a ton of now deprecated setup steps that you can replace with just making sure system update has run and you have the latest java installed.
Derek and I have been hard at work making some really great improvements to the beatseqr firmware and steppa sequencer. Here are a few of the things we’ve been doing lately:
I added a really nice feature that we’re calling “voice trigger indicator” … essentially what it does is flash the voice select LEDs as your sequence is running to indicate to you when each of the 8 channels is triggering. It’s easier to show than to tell, so I’ll get to work on a video for that asap.
Steppa now has a “current beat” set of indicator LEDs on the front interface. This was added so you can get an idea of where you are timing-wise if you’re doing stuff on your computer (instead of looking at the hardware, which will give you a *really* good idea of that all the time )
There’s been a bunch of minor features added to Steppa that mostly facilitate being able to pick up sequence data from within Max5. If you’re a max user, you can do all kinds of crazy stuff with the sequence as it’s running.
More good news while we’re talking about good news:
I have applied to exhibit at the Bay Area Maker Faire. We’re considering applying for Detroit and New York too, so if you want us to apply for those, leave a comment!
The arduino mega firmware is now open source. There are a bunch of things you would need to do in order to get started and I’ll highlight those in another post soon. I’ll update the license to indicate my intentions, but in a nutshell you’re free to download, analyze, improve, or modify the source, as long as you don’t resell it and you keep the original attribution intact with the code. Please do improve the software. I’m a school-trained artist first and a self-taught engineer second. http://github.com/stevecooley/beatseqr-software
Derek is going to our local ninja academy! Very exciting.
Awesome video of assistive technology user, edited with a two button head switch. 100304" class="external">http://gallery.me.com/markcoppin#100304< /a> (via @cookiecrook)
I’m using every single pin on the mega. I couldn’t squeeze this much functionality out of a regular arduino… it’s just too awesome for the little guy. 
